Success usually comes to those who are too busy to be looking for it.Henry David Thoreau

Echo Pole Saw Parts: What You Need to Know?

Echo Pole Saw Parts: What You Need to Know?

Looking for Echo Pole Saw Parts? You’ve come to the right place! In this article, we will answer all of your questions about Echo Pole Saw Parts. We’ll provide you with information on where to find replacement parts, how to identify which parts you need, and more. So, whether you’re a DIY enthusiast or just looking for a little help with repairs, read on for everything you need to know about Echo Pole Saw Parts!

What size chain is on an Echo pole saw?

The size of the chain on an Echo pole saw will depend on the model of saw that you have. However, most Echo pole saws use a 3/8-inch pitch chain. This means that the distance between any three consecutive rivets is 3/8 of an inch.

To determine the gauge of the chain, you will need to measure the width of one of the drive links. The drive link is the part of the chain that fits into the groove of the guide bar. It is typically wider than the other parts of the chain.

If the width of your drive link is 0.050 inches, then your chain is a 50-gauge chain. If it is 0.043 inches wide, then your chain is a 43-gauge chain.

You can use either type of chain on an Echo pole saw, but the 50-gauge chain will be less likely to come off of the saw.

How far does the Echo pole saw extend?

The Echo pole saw extends up to 14 feet. This gives you plenty of reach to trim branches that are high up.

However, the Echo pole saw is not just for reaching high branches. It can also be used to cut down small trees. The long reach of the saw makes it easy to cut through the trunk of a tree without having to worry about getting too close to the tree.

The Echo pole saw can also be used for pruning bushes and shrubs. The long reach of the saw means that you can easily get to the branches that are hard to reach with a regular pair of shears.

Pruning your plants with an Echo pole saw will help them stay healthy and look their best. [1]

How far does the Echo pole saw extend?

How do you start Echo pole saw?

The Echo pole saw has a two-stage process before starting. The first stage is to pull the cord out about 12 inches. This will engage the clutch.

The second stage is to pull the cord all the way out. This will start the engine.

To stop the saw, you can either release the trigger or push in the safety button. Pushing in the safety button will also disengage the clutch. [2]

What do Echo pole saw numbers mean?

The numbers on an Echo pole saw represent the different parts of the saw. The first number is the model number. The second number is the size of the bar. The third number is the power source.

The model number will tell you what features the saw has. For example, the model number for an Echo pole saw with a 14-inch bar and a gas-powered engine would be “PS1400.”

The size of the bar is important because it determines how much cutting power the saw has. A larger bar will be able to cut through thicker branches.

The power source determines how the saw is powered. Gas-powered saws are more powerful than electric-powered saws. However, they are also more expensive and require more maintenance.

If you are not sure which saw is right for you, you can always ask a salesperson or customer service representative for help. They will be able to guide you to the saw that best meets your needs.

What is the weight of an Echo pole saw?

The weight of an Echo pole saw will vary depending on the model. However, most Echo pole saws weigh between 10 and 15 pounds.

The weight of the saw is important because it determines how easy it is to use. A heavier saw will be more difficult to maneuver, but it will also be more powerful.

A lighter saw will be easier to use, but it may not have as much cutting power. It is important to find a saw that is the right weight for you. Otherwise, you may not be able to use it effectively. [3]

How many times do you prime an Echo chainsaw?

You should prime an Echo chainsaw four times before you start the engine. This will ensure that the engine gets enough fuel to start.

To prime the saw, locate the primer button. It is usually located near the carburetor. Press the primer button four times

Once you have pressed the primer button four times, pull the starter cord to start the engine. If the engine does not start, repeat the process.

It is important to make sure that you prime the saw before each use. This will help ensure that the saw starts quickly and runs smoothly.

What is the difference between a 325 and 3/8 chain?

The difference between a 325 chain and a 3/8 chain is the width of the chain. A 325 chain is narrower than a 3/8 chain.

The width of the chain determines how much cutting power the saw has. A wider chain will be able to cut through thicker branches.

However, a wider chain will also be more difficult to maneuver. It is important to find a balance between cutting power and maneuverability. [4]

Comparison of Echo Pole Saw Parts

Echo pole saws are a popular choice for professionals and homeowners alike when it comes to pruning and trimming trees. However, choosing the right parts for your Echo pole saw can be a daunting task, especially if you are new to this. In this table, we will compare various indicators that will help you make an informed decision when choosing Echo pole saw parts.

The table below provides a comparison of various indicators for Echo pole saw parts, including bar length, chain pitch, gauge, and drive links. These indicators determine the performance and suitability of the parts for your Echo pole saw. It is important to note that different Echo pole saw models may require different parts, so it is essential to check the manufacturer’s specifications before purchasing.

Indicator Description Range
Bar length The length of the cutting bar 10-12 inches
Chain pitch The distance between links 3/8 inch or 0.325 inch
Gauge The thickness of the drive link 0.050 inch or 0.058 inch
Drive links The number of links that fit on the bar 40-60 links

In summary, choosing the right Echo pole saw parts is crucial for the performance and safety of your saw. By considering the indicators above, you can ensure that you purchase parts that are suitable for your Echo pole saw and meet your specific needs.


Can a primer bulb be bypassed?

Yes, a primer bulb can be bypassed. However, it is not recommended. The primer bulb is there to help the saw start quickly and smoothly.

Can a primer bulb be bypassed

What chainsaw pitch is best?

There is no one “best” chainsaw pitch. The pitch that is best for you will depend on the type of sawing you plan to do.

If you are going to be cutting through thick branches, a larger pitch will be better. However, if you are only going to be doing light pruning, a smaller pitch will be sufficient.

Should you let a chainsaw warm up?

Yes, you should let a chainsaw warm up for several minutes before you start cutting. This will help the saw run more smoothly and prevent it from stalling.

What does 91 mean on chainsaw chain?

The “91” on a chainsaw chain indicates the spacing between the teeth. This is called the “pitch.”

A saw with a smaller pitch will have teeth that are closer together. This makes it better for cutting through thicker branches.

A saw with a larger pitch will have teeth that are further apart. This makes it better for making finer cuts. [5]

How long does Echo pole saw extend?

The Echo pole saw is an incredibly versatile tool for cutting and trimming trees and other foliage. It has an extendable pole that allows you to reach up to 16 ft. 2 in. This makes it ideal for reaching high branches, or for tackling large projects with ease.

The Echo pole saw is designed with a lightweight aluminum shaft that makes it easier to maneuver and use. This makes it great for both professionals and home users alike. It also features a comfortable ergonomic handle that helps reduce fatigue while using the saw.

The Echo pole saw is a powerful tool that can help you tackle any job with ease. With its extendable shaft, you can reach up to 16 ft. 2 in., giving you the ability to take on larger projects without having to worry about not being able to reach them.

How do you crank an Echo pole saw?

Cranking an Echo pole saw is a relatively simple process. First, make sure the saw is in the off position and that the chain brake is engaged. Next, remove the spark plug boot and then locate the starter cord handle. With a firm grip on the handle, pull it out until you feel slight resistance. Then, pull sharply to engage the starter mechanism. Finally, release the handle back to its original position and repeat this process until the engine starts up.

Once your engine has started, be sure to engage the chain brake before you begin using your pole saw. This will help ensure that you don’t accidentally start cutting without turning off your engine first. Additionally, if you are having trouble starting your Echo pole saw, try checking for any obstructions or blockages in its air filter or fuel tank before attempting to crank it again.

Is Echo a good pole saw?

The Echo Pole Saw is a popular and reliable option for those looking for a pole saw. It has an efficient two-stroke engine, which provides plenty of power to get the job done quickly and effectively. The 8-foot extension pole allows you to reach high branches without having to use a ladder, making it easy and safe to use. Additionally, the lightweight design makes it easy to maneuver in tight spaces.

The Echo Pole Saw also features an automatic oiler system that keeps the chain lubricated while you work, ensuring that your saw runs smoothly and efficiently. The included shoulder harness helps reduce fatigue when using the saw for extended periods of time. Plus, the anti-vibration handle helps make each cut more comfortable and precise.

Overall, the Echo Pole Saw is a great option for those looking for a reliable and powerful pole saw that can handle all kinds of pruning jobs.

Where are Echo pole saws made?

Echo pole saws are produced by the Echo Incorporated, a company based in Northbrook, Illinois. Founded in 1972, Echo is a leader in outdoor power equipment and has been producing innovative products for over 40 years.

Echo pole saws are made with quality components and materials to ensure they are durable and reliable. The company takes pride in its commitment to excellence, which means that all of their products are designed with the customer’s needs in mind. They also use advanced technology to ensure that the saws meet safety standards and provide consistent performance.

Echo’s pole saws are made in Japan, where the company has established strong relationships with suppliers who adhere to strict quality control measures. This ensures that each product meets Echo’s high standard of excellence before it reaches customers.

Useful Video: Unboxing The Echo 12 in 25cc Gas 2-Stroke Cycle Telescoping Pole Saw PPT-2620


When you buy an Echo pole saw, you are investing in quality. However, like any other tool, it will eventually need replacement parts. Luckily, all the parts you need can be easily found online. In this blog post, we took a close look at what Echo pole saws are and what kind of replacement parts you might need. We hope that this information has been helpful and that you now have a better understanding of how to maintain your Echo pole saw. Thanks for reading!


  1. https://www.echo-usa.com/power-pruners
  2. https://homeguides.sfgate.com/start-echo-chainsaw-82177.html
  3. https://lawnmowerhosp.com/product/echo-ppt2620-pole-saw-1295
  4. https://www.freshhandyman.com/3-8-vs-325-chain/
  5. https://www.chainsawsdirect.com/stories/1094-How-to-Measure-Your-Bar-and-Chain-for-Replacement.html