Success usually comes to those who are too busy to be looking for it.Henry David Thoreau

Fiskars Pole Saw Blade Replacement: What to Do?

Fiskars Pole Saw Blade Replacement: What to Do?

If you’re a homeowner, then there’s a good chance you’ve used a Fiskars pole saw. They’re incredibly versatile tools that can make quick work of trimming branches and small trees. But what do you do if the blade on your pole saw needs to be replaced? In this article, we’ll answer that question and give you some tips on how to replace the blade yourself.

How do you attach a blade to a pole saw?

There are two ways to attach a blade to a pole saw: with a screw or with a snap-on system. If your pole saw has a screw, simply unscrew the old blade and screw on the new one. If your pole saw has a snap-on system, you’ll need to first release the old blade by pressing the release button. Then, line up the new blade with the attachment points and snap it into place. [1]

How do you thread a Fiskars Tree Pruner?

Fiskars Tree Pruners have a special self-threading system that makes it easy to replace the blade. First, remove the old blade by unscrewing it from the pruner head. Then, align the new blade with the attachment points and screw it into place. The self-threading system will do the rest!

How do you use a Fiskars branch cutter?

Fiskars branch cutters are designed for cutting branches up to 1″ in diameter. To use, simply line up the blade with the branch and push down on the handle to make the cut.

How do you use a Fiskars branch cutter

How do you sharpen a Fiskars pole saw blade?

Fiskars pole saw blades can be sharpened with a file or a grinding wheel. First, remove the old blade from the pole saw. Then, use a file or grinding wheel to sharpen the cutting edge of the blade. Once you’ve achieved a sharp edge, reattach the blade to the pole saw and you’re ready to go!

Where is the model number on Fiskars Tree pruner?

The model number on a Fiskars Tree Pruner is located on the blade. Look for the stamped markings that say “Fiskars” and the model number. [2]

How do you sharpen pruners by hand?

The first step is to remove any dirt or debris from the pruners. Next, use a flat file to even out the cutting edge. Start at the base of the blade and work your way up to the tip. Be sure to keep the file level so that you don’t create any uneven surfaces.

Finally, use a sharpening stone to put a fine edge on the blades. Start with a coarse gritstone and move to a finer one until you have a razor-sharp edge.

If your pruners are still not cutting as well as they should, it may be time for a new blade. You can purchase replacement blades at most hardware stores.

How do you use Fiskars diamond coated blade sharpener?

To use the Fiskars diamond coated blade sharpener, you will need to first remove the old blade from the pole saw. Once the old blade is removed, you will need to clean the area around the blade mounting hole. Next, take the new blade and align it with the mounting hole. Once the new blade is in place, you will need to tighten the set screw that holds it in place. Finally, reattach the chainsaw bar and you are ready to go.

Do Fiskars have a lifetime warranty?

Fiskars does have a lifetime warranty on their products. However, this warranty does not cover normal wear and tear or damage caused by misuse. If you have a question about whether your product is covered by the warranty, you can contact Fiskars customer service for more information. [3]

How do you sharpen a Fiskars reel mower?

If your Fiskars reel mower is not cutting as well as it used to, you may need to sharpen the blades. This is a simple process that you can do at home with a few basic tools.

First, remove the plastic cover from the bottom of the mower. Next, use a Phillips screwdriver to remove the screws that hold the blade in place. Once the blade is removed, carefully inspect it for damage. If the blade is damaged, you will need to replace it.

If the blade is not damaged, you can sharpen it using a file or a sharpening stone. Be sure to follow the manufacturer’s instructions when sharpening the blade.

Once you have sharpened the blade, reassemble the mower and test it on a piece of lawn. If it cuts well, you’re all set! If not, you may need to adjust the blade according to the manufacturer’s instructions.

How do you sharpen a Fiskars reel mower

Fiskars Pole Saw Blade Replacement Comparison Table

This table compares different types of Fiskars pole saw blades based on various indicators.

Blade Model Blade Length (inches) Blade Material Teeth per Inch (TPI) Weight (lbs) Price ($)
Fiskars 93336920K 15 Steel 8 0.53 14.99
Fiskars 93336966K 12 Steel 6 0.38 13.99
Fiskars 393540-1001 12 Carbon Steel 5 0.45 15.99
Fiskars 393540-1002 15 Carbon Steel 5 0.53 17.99

This table shows a comparison of different Fiskars pole saw blade replacement options. The indicators compared include blade length, blade material, teeth per inch (TPI), weight, and price. The blade models compared are the Fiskars 93336920K, 93336966K, 393540-1001, and 393540-1002. By comparing these indicators, users can choose the best pole saw blade replacement option for their specific needs and budget.


How do I know if I need a new circular saw blade?

There are a few telltale signs that it might be time to replace your circular saw blade. If the blade is damaged or cracked, it needs to be replaced immediately. If the teeth on the blade are excessively worn down, it’s also time for a replacement. Finally, if you’ve noticed that your saw isn’t cutting as efficiently as it used to, a new blade may help improve its performance.

Is more teeth on a saw blade better?

The number of teeth on a saw blade is known as the “tooth count.” The tooth count will vary depending on the type of material you’re cutting and the level of precision you need. For example, a blade with more teeth will make a cleaner cut in softer materials like wood, but it will take longer to make the cut. A blade with fewer teeth will cut faster but may leave a rougher edge. [4]

What is the best blade for cutting wood?

There are many different types of blades available for cutting wood, but the best blade for your project will depend on the type of wood you’re cutting and the level of precision you need. If you’re cutting softwoods like pine or cedar, a blade with more teeth will give you a cleaner cut. If you’re cutting hardwoods like oak or maple, a blade with fewer teeth will be faster but may leave a rougher edge.

Can I use a 7 inch blade in a 7 & a quarter inch circular saw?

The 7 & a quarter inch circular saw is a larger and more powerful tool than the 7 inch blade. You can use a 7-inch blade in your 7 & a quarter inch circular saw, but it will not be as effective or efficient. The larger and more powerful the tool, the better suited it is for heavier duty work. [5]

How do you change the blade on a Fiskars pole saw?

Changing the blade on a Fiskars pole saw is a relatively simple process that can be completed in a few steps.

First, make sure that the saw is unplugged and the power switch is in the off position. Then, loosen the bolt located at the base of the saw head with an adjustable wrench. Once you’ve loosened the bolt, pull out the old blade and insert the new one into place. Make sure to line up all of the teeth correctly before tightening down the bolt with your adjustable wrench. Finally, plug in your saw and turn it on to make sure it’s working properly.

It’s important to remember to always use caution when changing blades on any type of power tool, including a Fiskars pole saw. Wear protective gloves and safety goggles while working with sharp blades, and always keep your hands away from any moving parts.

Where is the model number on a Fiskars pole saw?

The model number on a Fiskars pole saw can be found printed on the UPC code located on the pole. The UPC code is a 12-digit barcode that uniquely identifies each product sold in stores. It is typically printed near the bottom of the pole, near where it connects to the saw blade. To find the model number, look for a string of numbers and letters that starts with the letter ‘P’. This should be followed by two or three more digits, which will be your model number.

It’s important to make sure you have the correct model number when ordering replacement parts or accessories for your Fiskars pole saw. Knowing this information will help ensure you get exactly what you need for your specific saw. If you still can’t find it, you can also contact Fiskars customer service directly and they will be able to provide you with the necessary information.

How do you sharpen a Fiskars pole saw blade?

Sharpening a Fiskars pole saw blade can be done with a few simple steps.

First, use a flat file to sharpen the blade. Start by filing from the inner edge of the blade and move outward in short strokes. Make sure to keep the file at an angle of around 15 degrees relative to the blade, and use light pressure as you work. This will help ensure that you don’t damage or over-sharpen the blade.

Next, use a sharpening stone to further refine the edge of the blade. Place the stone on a flat surface and hold it firmly in place. Run each side of the blade along it in an even motion until you achieve your desired sharpness.

Finally, use steel wool or a wire brush to remove any residue left behind from filing and sharpening. This will help prevent rusting and ensure that your pole saw is ready for use whenever you need it!

How do you sharpen a Fiskars pole pruner?

Sharpening a Fiskars pole pruner is not difficult. First, you need to remove the blade from the pole. To do this, you will need to unscrew the clamping bolt and washer located at the base of the blade. Once removed, you can use a file or sharpening stone to sharpen the blade. Be sure to keep your strokes even and consistent as you sharpen each side of the blade.

When finished, reassemble the blade onto the pole by reversing the steps used to remove it. Tighten the clamping bolt and washer securely so that it holds tight when in use. Finally, lubricate all moving parts with oil or silicone spray for smooth operation. By following these simple steps, you should have a sharpened Fiskars pole pruner ready for use!

What angle should I sharpen my pole saw?

The angle at which you should sharpen your pole saw depends on the type of saw and its intended use. Generally, a standard 90-degree angle is the most common for sharpening a pole saw blade. This angle works best for general purpose cutting and pruning tasks.

If you plan to use your pole saw for more specialized tasks, such as cutting through hardwood or larger branches, then you may want to sharpen the blade at a slightly steeper angle (around 100 degrees). This will give the blade a sharper edge that can cut through tougher materials more efficiently.

It’s important to note that when sharpening any type of saw blade, you should always use a file or stone specifically designed for sharpening blades. Using the wrong tool can damage the blade and reduce its effectiveness.

Useful Video: Fiskars 16 ft Pole Saw 15″ blade & Pruner Review 394732


Fiskars pole saw blade replacement is a great way to keep your pruning shears in good shape. By following the proper steps, you can ensure that your blades will last for many years. If you need help finding the right parts or accessories for your Fiskars pruner, contact us today. We’d be happy to help you find what you need to keep your garden looking its best.


  1. https://homeguides.sfgate.com/install-pole-pruner-blade-103995.html
  2. https://www.cpsc.gov/Recalls/2021/Fiskars-Brands-Recalls-16-Foot-Pole-Saw-Pruners-Due-to-Laceration-Hazard
  3. https://www.fiskars.com/en-us/customer-service/faqs
  4. https://www.protoolreviews.com/news/choosing-right-circular-saw-blade/27537/
  5. https://www.obsessedwoodworking.com/can-i-use-a-7-inch-blade-in-a-7-1-4-inch-circular-saw/