If you’re the proud owner of a Sun Joe pole saw, then you know that it’s a powerful and convenient tool to have in your arsenal. But what happens when something goes wrong and it needs repairs? Luckily, Sun Joe has you covered with their comprehensive line of replacement parts. In this article, we will answer some of the most common questions about Sun Joe pole saw replacement parts. So read on to learn more!
Tension Nut
One of the most common questions we get about Sun Joe pole saw replacement parts is regarding the tension nut. The tension nut is located on the shaft of the saw and is responsible for keeping the chain tight. If your chain is loose, it can cause several problems, such as premature wear, loss of power, and kickback. To adjust the tension nut, simply use a wrench to turn it clockwise or counterclockwise until the chain is tight enough. It’s important not to overtighten the nut, as this can damage the saw. [1]
Washer
Another common question we get is about the washer. The washer is located under the tension nut and helps to keep the chain tight. If your washer is damaged, it can cause the same problems as a damaged tension nut. To replace the washer, simply remove the old one and install a new one in its place.
Tension Screw
The tension screw is a long, thin screw that goes through the entire length of the pole. It is used to attach the saw blade to the pole. The tension screw is important because it keeps the blade from wobbling or coming loose.
Oil Cap
The oil cap is located on the side of the saw near the handle. It is used to add oil to the chain and keep it lubricated. If your oil cap is damaged, it can cause the chain to become dry and worn. To replace the oil cap, simply remove the old one and install a new one in its place. [2]
Chain/Sprocket End Cover
The chain/sprocket end cover is one of the most important Sun Joe pole saw replacement parts. It protects the chain and sprocket from debris and damage while in use. If this part is damaged, it can cause the chain to come off, which can be very dangerous. Always check this part for damage before using your pole saw.
End Cover Nut
The cover nut is used to secure the bar and chain onto the saw. It is important to make sure that this nut is tight before using your pole saw, as a loose cover nut can cause the bar and chain to come off of the saw while in use.
End Cover Nut Cap
This is a small, black plastic cap that covers the end of the saw’s main shaft. It is held in place by a small set screw.
The cover nut cap protects the end of the pole saw’s main shaft from damage. If the cover nut cap becomes damaged, it will need to be replaced.
Multi-Angle Head Adjustment Dial
Replacement parts for your Sun Joe pole saw can keep your saw working like new. Whether you need a new multi-angle head adjustment dial or a replacement chain, there are plenty of options to choose from.
One of the most popular parts to replace on a Sun Joe pole saw is the multi-angle head adjustment dial. This part allows you to adjust the angle of the blade, making it easier to reach branches that are out of your normal range. The dial also makes it possible to change the size of the cutting area, which can be helpful when working in tight spaces. [3]
Adjustment Dial Bolt
The adjustment dial bolt is one of the most important Sun Joe pole saw replacement parts. This bolt allows you to adjust the tension on the blade, which can help you achieve a precise cut. If this bolt becomes loose, it can cause the blade to become misaligned, which can result in an uneven or jagged cut.
Hex Key Wrench
This is a multi-purpose tool that is used to loosen or tighten the different bolts and screws on the pole saw. It is a must-have for anyone who has a Sun Joe pole saw.
Cutting Bar Sheath
If your cutting bar is looking a little worse for wear, you may be able to extend its life with a sheath. A sheath is simply a cover that goes over the cutting bar, protecting it from nicks, scratches, and other damage.
You can find replacement sheaths for Sun Joe pole saws online or at your local hardware store. Be sure to measure your cutting bar before purchasing a sheath, as they come in different sizes. [4]
FAQ
How do you put a chain back on a Sun Joe?
If your chain has come off of your Sun Joe pole saw, don’t worry, it’s easy to put back on. First, make sure that the sprocket is in the correct position. Next, thread the chain around the sprocket and through the guide bar. Once the chain is in place, pull it tight and secure it with the cover nut.
How do I fix the chain on my pole saw?
If your pole saw’s chain has come loose, you can easily fix it yourself. First, make sure that the chain is the correct size for your saw. Next, use a pair of pliers to tighten the screws that hold the chain in place. Finally, adjust the tension on the chain so that it is tight enough to stay in place but not so tight that it will bind.
How do you change the chain on a sun Joe pole saw?
It is easy to replace the chain on a Sun Joe pole saw. You will need to purchase a new chain, and then follow the instructions in the user manual for your particular model. In general, you will need to remove the old chain, put on the new chain, and then tension it properly.
How many times can you sharpen a chainsaw chain?
You can sharpen a chainsaw chain multiple times, but it will eventually need to be replaced. How often you need to sharpen your chain will depend on how often you use it and what type of wood you are cutting.
If you use your chainsaw regularly, you may need to sharpen the chain every few weeks. However, if you only use it occasionally, you may be able to get away with sharpening it once a month or so.
Eventually, even with regular sharpening, the chain will become too worn and will need to be replaced. [5]
Useful Video: Sun Joe® Electric Pole Chain Saw
Conclusion
Whether you need a new chain, blade, or simply want to accessorize your Sun Joe pole saw, there are several places you can turn for quality replacement parts. You can find many of the most popular Sun Joe pole saw replacement parts on Amazon. However, it’s important to make sure that you choose the right part for your particular model. The last thing you want is to order the wrong size or type of replacement part and be stuck with an unusable product. Do your research and take advantage of customer reviews to ensure that you get exactly what you need when looking for Sun Joe pole saw replacement parts. With a little planning and effort, you’ll be up and running in no time!
References:
- https://www.tension-nut.jp/EN/
- https://remingtonpowertools.com/how-to/pole-saw-chainsaws-ladders-dont-mix/
- https://1d81e75c4337a6e2e3c2-4a69748413de5fcbd7a7a944817c2356.ssl.cf1.rackcdn.com/49685184_documents/49685184_1.pdf
- https://www.ereplacementparts.com/pole-saw-parts-c-18715_202791.html
- https://www.mcculloch.com/int/tree-and-hedge-care/how-to-tell-when-your-chainsaw-chain-needs-replacing/
Leave a Reply