Quotes

Success usually comes to those who are too busy to be looking for it.Henry David Thoreau

DeWalt Pole Saw Problems: What to Do?

DeWalt Pole Saw Problems

Dewalt pole saws are some of the most popular on the market. They are known for their power and durability. However, even the best tools can have problems from time to time. If you are experiencing issues with your Dewalt pole saw, don’t worry! We are here to help. In this blog post, we will discuss common problems with Dewalt pole saws and how to fix them. We will also provide tips on how to get the most out of your saw. Keep reading for more information!

DeWalt Pole Saw Does Not Turn On

One of the most common problems with Dewalt pole saws is that they will not turn on. Although it can be irritating, there are some steps you can follow to fix the issue.

First, check to make sure that the batteries are properly installed. If the batteries are loose, it could prevent the saw from turning on. Make sure that the batteries are seated correctly and that the terminals are clean.

If the batteries seem to be installed correctly, then try charging them. Sometimes, the batteries just need to be charged for the saw to work properly. Make sure to charge the batteries for at least an hour before using the saw again.

If your Dewalt pole saw is unresponsive after checking the battery, then the problem might be with the saw itself. A professional will need to assess the situation before any repair takes place. [1]

Locked Up

If your Dewalt pole saw is feeling stiff or locked up, it might just need some lubrication. You can easily do this yourself by disconnecting the bar and chain from the saw. Then, use a brush to clean off any dirt or debris that might be clogging things up. Once everything is clean, apply a few drops of oil to all the moving parts. Reconnect the bar and chain and give it a try. If it’s still not working properly, you might need to replace some parts.

DeWalt Pole Saw Does Not Turn On

Battery Is Not Charged

Another common problem with Dewalt pole saws is that the battery is not charged. This can be frustrating, but there are a few things you can do to fix the problem.

First, check to make sure that the charger is properly plugged in and that the outlet is working. Sometimes, the charger can become loose or disconnected. If the outlet is not working, you will need to reset the circuit breaker or replace the fuse.

Once you have verified that the charger is plugged in correctly and that the outlet is working, let the battery charge for at least an hour. Sometimes, it takes a while for the battery to fully charge. If your Dewalt pole saw still will not turn on, then there may be an issue with the saw itself. You will need to take it to a qualified repair person to have it checked out. [2]

Trigger Is Stuck

If the trigger on your Dewalt pole saw is stuck, there are a few things you can do to try and fix it. First, check to see if there is any debris blocking the trigger mechanism. If there is, try clearing it away with a toothpick or other small object.

Next, try tapping on the trigger with a hammer to see if that gets it unstuck. If neither of these methods works, you may need to replace the trigger assembly.

Dewalt Pole Saw Is Not Working

If your Dewalt pole saw isn’t working as expected, run through the following checklist to try and identify the problem. If the blade is dull or damaged, check to see if it needs to be replaced.

Next, check the bar and chain to see if they are damaged or excessively dirty. If they are, you will need to clean or replace them.

Finally, check the battery to see if it is properly charged. If it is not, let it charge for at least an hour before trying to use the saw again.

If your Dewalt pole saw still is not working properly after following these steps, then there may be an issue with the saw itself. [3]

Dewalt Pole Saw Will Not Cut Deep Enough

If you find that your Dewalt pole saw is not cutting as deep as it should, there are a few things you can do. First, check the chain to see if it is dull. If it is, you will need to sharpen it or replace it.

Another thing you can try is adjusting the tension on the chain. If the chain is too loose, it will not cut as deeply as it should. But if the chain is too tight, it could cause the engine to overheat and damage the saw.

Dewalt Pole Saw Will Not Cut Deep Enough

My Cuts Are On An Angle

If you find that your cuts are not straight, there are a few things you can do to try and fix the problem. The first thing you should do is check the blade to see if it needs to be replaced. If it is not working, you will need to replace it.

Next, check the bar to see if it is bent. Finally, make sure that you are holding the saw correctly. The saw should be perpendicular to the wood you are trying to cut. If you are holding it at an angle, it will cause the blade to cut on an angle as well.

My Saw Blade Wiggles

If you notice that the blade on your Dewalt pole saw is wiggling, there are a few things you can do to try and fix it. First, check the bar to see if it is bent. If so, you will need to replace it.

Next, check the blade to see if it is dull or damaged. Finally, make sure that the blade is properly attached to the saw. Sometimes, the blade can become loose over time. If it is not properly attached, it will cause the blade to wiggle.

My Saw Is Not Cutting Easily

If your saw is having difficulty making cuts, there are a few things you can do to try to fix the problem. First, check the blade to see if it is dull or damaged. If so, you will need to replace it.

Another possibility is that the chain is not properly tensioned. The chain should be tight enough that it does not sag when the saw is in use, but not so tight that it binds. If the chain is too loose, it can slip off the sprocket and cause damage to the bar. If the chain is too tight, it can overheat and cause premature wear.

The final possibility is that there is something wrong with the motor. If your saw suddenly stops working altogether, this is likely the problem. You will need to take it to a qualified service center for repairs.

A Crack In My Blade

If you notice a crack in the blade of your Dewalt pole saw, there are a few things you can do. First, try to bend the blade back into place. If it is a small crack, this may be enough to fix the problem.

If the crack is larger, or if bending the blade does not fix the problem, you will need to replace the blade.

Takes A Lot Of Force To Cut

If your Dewalt pole saw is taking a lot of force to cut, there are a few things you can do to troubleshoot the issue. First, check the chain tension. If the chain is too loose, it won’t have enough power to make clean cuts. You should be able to easily adjust the chain tension by turning the tensioning knob on the side of the saw.

Another possible reason why your saw is having trouble cutting could be because the blade is dull. Over time, the blade will inevitably become dull and will need to be replaced. You can tell if the blade is dull if it’s leaving jagged or uneven cuts. If this is the case, you’ll just need to replace the blade.

Dewalt Pole Saw Stops Moving Forward But Stays On

If your Dewalt pole saw stops moving forward but stays on, there are a few things you can do to fix the problem. First, check to make sure that the batteries are properly installed and charged. Next, check the drive belt to see if it is loose or damaged. Finally, clean the deck area of any debris that may be causing the problem.

Dewalt Pole Saw Stops Moving Forward But Stays On

Feels Like Overheating Or See Smoke

If your Dewalt pole saw starts smoking or feels like it’s overheating, there are a few things you can do. First, check the air filter to see if it needs to be cleaned or replaced. If the air filter is clean, then take a look at the spark plug. The spark plug may need to be replaced if it’s dirty or damaged. You should also check the fuel mixture to make sure it’s correct. Finally, if your pole saw is still giving you trouble, you may need to take it to a professional for service.

Material Issue

If your Dewalt pole saw is made with fiberglass or aluminum, it may be the material itself that’s causing trouble. These metals are not as durable as steel and are more susceptible to damage. If you’re having trouble with your pole saw, check to see if the metal is bent or frayed in any way. If it is, you’ll need to replace the entire pole.

Blade Issue

The blade is the most important part of the pole saw. If it’s not working correctly, then the whole system won’t work.

If you have a problem with the blade, the first thing you should do is check to see if it is properly installed. If it isn’t, then follow the manufacturer’s instructions on how to install it correctly.

Once you’ve installed the blade, make sure that it is sharp. A dull blade will cause the pole saw to work less efficiently and can even damage the tree you’re trying to cut.

If your blade is still having trouble, then it might be time to replace it. You can find replacement blades at most hardware stores.

FAQ

How do you tighten the chain on a Dewalt 20V pole?

To tighten the chain on your Dewalt 20V pole saw, you’ll need to adjust the tensioning knob. The tensioning knob is located on the side of the saw and can be turned by hand. You’ll know you’ve tightened the chain enough when there’s no slack in the chain and it’s tight against the bar.

How do you tighten the chain on a Dewalt 20V pole?

What type of oil do you put in a Dewalt pole saw?

Dewalt pole saws require a special type of oil that can be purchased at most hardware stores. The oil must be specifically designed for use in pole saws and other power equipment. [4]

Can I use motor oil in my pole saw?

No, you should not use motor oil in your pole saw. Motor oil is too thick and will clog up the saw’s engine. Instead, use a specifically designed pole saw oil.

Does Oregon Bar fit Dewalt chainsaw?

If you have a Dewalt chainsaw, you may be wondering if the Oregon bar will fit. The answer is yes! You can easily find an adapter kit that will allow you to use the Oregon bar with your Dewalt chainsaw. [5]

Useful Video: DeWalt pole saw battery operated 20v – how to clear the jam?

Conclusion

In summation, if you have a problem with your DeWalt pole saw, there are three main potential causes: the battery, the chain, or the blade. If you troubleshoot each of these elements systematically, you should be able to identify and fix the problem fairly easily. Do you have any other tips for fixing Dewalt pole saw problems? Share them in the comments below!

References:

  1. https://www.ifixit.com/Wiki/Dewalt_DW936_Troubleshooting
  2. https://www.manualslib.com/manual/2011514/Dewalt-Dcps620.html?page=17
  3. https://manuals.plus/dewalt/20v-max-pole-saw-dcps620-manual
  4. https://www.homedepot.com/p/DEWALT-20V-MAX-8-in-Cordless-Battery-Powered-Pole-Saw-Kit-22-in-Cordless-Pole-Hedge-Trimmer-w-1-4-0-Ah-Battery-Charger-DCPS620M1WPH820/318588752
  5. https://www.amazon.ca/Oregon-R45-Advancecut-Saw-Chain/dp/B01D230BNM