Looking for a pole saw attachment that can do it all? Look no further than the Ryobi Pole Saw Attachment. This handy tool can help you prune trees, cut down small branches, and more. But before you buy one, there are a few things you should know about it. In this article, we will discuss the features of the Ryobi Pole Saw Attachment and answer some common questions people have about it.
How do you hook up a Ryobi pole saw?
The Ryobi Pole Saw Attachment is designed to work with any Ryobi ONE+ 18-volt battery (battery not included). To properly use the saw, insert the battery into its compartment located on the side of the saw and twist it to lock it in place. Afterwards, press the button to release the blade from the side of the saw. Attach the blade to the guide on the pole until you hear it click. Finally, use the knob at the end of the pole to secure the blade in place.
How do you use Ryobi to expand its pole saw?
To extend the Ryobi Pole Saw Attachment, first loosen the knob at the end of the pole. Next, pull out the pole to the desired length and tighten the knob again. The saw can be extended from 4 feet to 8 feet, depending on your needs.
How do you attach a pole saw attachment?
The Ryobi Pole Saw Attachment can be attached to any Ryobi ONE+ 18-volt battery (sold separately). To do this, simply insert the battery into the saw’s battery compartment and twist it to lock it in place. Next, press the button on the side of the saw to release the blade. Then, align the blade with the guide on the pole and push it until it clicks into place. Finally, tighten the knob at the end of the pole to secure the blade.
Do you need to oil a Ryobi pole saw?
Yes, you will need to oil the Ryobi Pole Saw Attachment from time to time to keep it in good working condition. The best way to do this is to use a lubricant specifically designed for pole saws. This can be purchased at most hardware stores.
Do Ryobi pole saws need oil?
Yes, Ryobi pole saws need oil. The amount of oil that your saw needs will depend on the model of saw that you have. Check your owner’s manual for specific instructions on how much oil to add to your saw.
To add oil to your Ryobi pole saw, first locate the fill port on the side of the saw. Remove the cap from the fill port and insert the nozzle of the oil bottle into the port. Squeeze the bottle to add oil to the reservoir until it reaches the full line on the dipstick. Replace the cap on the fill port and wipe up any spillage with a clean cloth. 
What is the fuel mixture for a Ryobi pole saw?
The fuel mixture for Ryobi pole saws is 25:1. This means that for every 25 parts of gasoline, you add one part oil. You can use any type of 2-cycle oil, but we recommend using a name brand oil such as Ryobi 2-Cycle Oil. 
Can you use motor oil instead of bar and chain oil?
No, you should not use motor oil instead of bar and chain oil. Motor oil is too thick and will gum up the saw’s parts. Bar and chain oil is specifically designed to lubricate chainsaws and keep them running smoothly. 
What type of gas does a Ryobi have?
All Ryobi Outdoor products are designed to use unleaded gasoline with a minimum octane rating of 87. Ethanol-blended fuel sources can be used for Ryobi Outdoor products, though performance may dip. You will see the best outcomes if you use fuel that is fresh and has no more than 10% ethanol.
Is ethanol a shield oil?
No, ethanol is not a shield oil. Shield oils are designed to prevent corrosion and extend the life of your outdoor power equipment. Ethanol-blended fuels (e.g. E10) are acceptable for use in Ryobi Outdoor products, but performance may be reduced. For best results, use fresh fuel with no more than 10% ethanol content. 
What type of fuel does a Ryobi CS26 use?
The Ryobi CS26 uses a mixture of unleaded gasoline and two-cycle oil. The gas-to-oil ratio is 25:1 for this model. 
How much oil does a 4 cycle Ryobi trimmer take?
The amount of oil your 4 cycle Ryobi trimmer takes will depend on the model of your trimmer. Please consult your owners manual for specific oil capacity information.
Useful Video: Review of the Ryobi Expand-It 10 in. Universal Pole Saw Attachment
The Ryobi Pole Saw Attachment is a great accessory for anyone with a Ryobi trimmer. It allows you to reach higher branches and cut them down without having to use a ladder. It’s also relatively lightweight and easy to maneuver, making it a good choice for small yards or areas with tight spaces. If you’re looking for an attachment that can help you take care of your yard work quickly and easily, the Ryobi Pole Saw Attachment is definitely worth considering.