Success usually comes to those who are too busy to be looking for it.Henry David Thoreau

Fiskars Pole Saw Parts: What You Need to Know?

Fiskars Pole Saw Parts: What You Need to Know?

Looking for Fiskars Pole Saw Parts? You’ve come to the right place! In this article, we will answer some of the most common questions about Fiskars Pole Saw Parts. We will cover everything from what types of parts are available to how to find replacement parts if you need them. So, whether you’re just starting out with a Fiskars Pole Saw or you’ve been using one for years, read on for the answers to your questions!


What are the specifications of Fiskars Pole Saw Parts?

The first thing to know about Fiskars Pole Saw Parts is that there are two main types: OEM (original equipment manufacturer) parts and aftermarket parts. OEM parts are made by Fiskars specifically for their pole saws, while aftermarket parts are made by other companies to fit Fiskars pole saws. Both types of parts can be used interchangeably, but you may find that one type or the other works better for your needs.

OEM parts are generally more expensive than aftermarket parts, but they are also usually of higher quality. If you can afford it, we recommend sticking with OEM parts for the best results. However, if you’re on a budget, aftermarket parts can be a good option as well.

When it comes to specific parts, there are several different types that you may need at some point. These include:

  • Chains
  • Blades
  • Bars
  • Sprockets
  • Oil
  • Filters

If you’re not sure which part you need, consult your Fiskars Pole Saw manual or contact a Fiskars customer service representative for help. [1]


What do you get when you purchase a Fiskars Pole Saw?

When you purchase a Fiskars Pole Saw, you’ll receive the saw itself, a blade, a bar, and a chain. You’ll also get a manual that includes assembly instructions and safety information. Depending on the model of pole saw you purchase, you may also receive additional items, such as an oil bottle or carrying case.

If any of the parts are damaged or missing when you open the box, contact Fiskars customer service right away for replacement parts or a refund.


Safety First

Is it safe to use a Fiskars Pole Saw?

Yes, it is safe to use a Fiskars Pole Saw if you follow the instructions in the manual and take proper safety precautions. Some of the safety features built into Fiskars Pole Saws include:

  • A chain brake that stops the chain from moving if it becomes jammed
  • A low kickback bar and chain that reduce the risk of injury if the saw kicks back while in use
  • A handle that is designed to minimize vibration for operator comfort and safety

To further reduce the risk of injury, always wear protective gear when using your pole saw, including gloves, eye protection, and sturdy footwear.

Extending and Locking the Pole

How do you extend and lock the pole on a Fiskars Pole Saw?

To extend the pole on your Fiskars Pole Saw, first, make sure that the saw is turned off and the chain is not moving. Then, loosen the extension knob by turning it counterclockwise. Next, pull out the pole to your desired length and tighten the extension knob by turning it clockwise. Finally, push down on the locking lever to lock the pole in place.

To shorten the pole, repeat the above steps in reverse order.

Pruning and Cutting: How’d it Do?

How well does the Fiskars Pole Saw cut and prune?

The Fiskars Pole Saw is designed for both light pruning and heavy-duty cutting. The saw can easily cut through branches up to 6 inches in diameter, making it a good choice for most homeowner needs. However, if you’re looking for a saw that can handle larger branches, you may want to consider a different model.

Pruning and Cutting: How’d it Do

Pruning Performance

When it comes to pruning, Fiskars pole saws offer unbeatable performance. With a cutting head that swivels up to 230 degrees, you can quickly and easily prune at any angle. The durable cutting blade is made of hardened steel, so it can handle even the toughest branches. And the unique power-lever technology multiplies your leverage to give you up to two times more cutting power than traditional pole saws.

Comfortable, Rigid & Lightweight Pole

All that cutting power means nothing if you can’t comfortably hold the saw. That’s why Fiskars pole saws feature a comfortable, lightweight fiberglass pole that is also rigid and won’t flex while you’re cutting. The ergonomic design makes it easy to grip the pole, even when your hands are wet or gloves are being worn.

To further reduce operator fatigue, the Fiskars pole saw includes a padded strap that helps take the weight off your arms while you’re working. [2]

Saw Cutting Performance

The Fiskars pole saw is a versatile tool that can help you tackle a variety of tough cutting jobs, whether you’re trimming branches or clearing brush. But to get the most out of your saw, it’s important to choose the right parts and accessories. In this guide, we’ll help you understand the different types of Fiskars pole saw parts and how they can impact your saw’s performance.

First, let’s start with the basics: the blade. The type of blade you use will have a big impact on both the speed and quality of your cuts. For instance, a standard steel blade is great for general-purpose cutting, but if you’re looking for faster, cleaner cuts, you might want to consider upgrading to a carbide-tipped blade.

Next, you’ll need to choose the right cutting head for your saw. If you’re only going to be making occasional cuts, a basic head will suffice. But if you plan on using your saw frequently, or for more demanding applications, you might want to consider an upgraded head with features like a built-in branch hook or an automatic chain tensioner.

Finally, don’t forget about the pole. The type of pole you use can impact both the reach and stability of your saw. For example, if you need to trim branches that are out of your reach, you might want to consider adding an extension pole to your saw. And if you’re working in windy conditions, a heavier-duty pole will help keep your saw steady.

Saw Cutting Performance


Fiskars pole saws are backed by a limited warranty, which covers defects in materials and workmanship for the life of the product. In addition, Fiskars offers a variety of replacement parts and accessories to keep your saw running like new.

Whether you need a new blade, cutting head, or pole, Fiskars has the parts you need to keep your saw in top condition. And if you’re ever unsure about what part you need, our customer service team is always happy to help.


If you’re looking for a versatile, easy-to-use pole saw that can handle most homeowner needs, the Fiskars Pole Saw is a great choice. With a comfortable grip, durable cutting blade, and extendable pole, it’s an ideal tool for trimming branches and clearing brush.

How do you use a Fiskars pole pruner?

To use a Fiskars pole pruner, start by extending the pole to your desired length. Then, position the cutting head at the base of the branch you want to cut. Finally, squeeze the handle to activate the blade and cut through the branch.

When you’re finished cutting, release the handle to deactivate the blade. Then, lower the pole and retract it to its original length. [3]

How do you put the blade on a Fiskars pole saw?

To put the blade on a Fiskars pole saw, start by removing the old blade from the cutting head. Next, align the teeth of the new blade with the teeth of the cutting head. Finally, insert the blade into the head and tighten the screws to secure it in place.

If you’re having trouble aligning the blade, consult the owner’s manual for your specific model of Fiskars pole saw.

How can I replace Fiskar?

If you need to replace any part of your Fiskars pole saw, the first thing you’ll need to do is identify the model number of your saw. This can be found on the main body of the saw, just below the handle. Once you have the model number, you can use the Fiskars online parts store to find the exact replacement part you need.

What is the rope for on a pole saw?

The rope on a pole saw is used to extend and retract the pole. To extend the pole, simply pull on the rope until the pole is at your desired length. To retract the pole, hold onto the handle and allow the weight of the saw to pull the rope through the housing.

If your saw doesn’t have a rope or if the rope is damaged, you can purchase a replacement from the Fiskars online parts store.

How do you change a blade on a pole saw?

One of the most common questions we get asked is how to change the blade on a Fiskars pole saw. The process is pretty simple, but there are a few things you need to know before you get started.

First, you’ll need to make sure that you have the right tools for the job. You can also check more information about tools and how to use them on the ToolsProfy blog. You’ll need a Phillips head screwdriver and a pair of pliers. You’ll also need a new blade. We recommend using a Fiskars brand blade, as they’re specifically designed for use with Fiskars pole saws.

Once you have your tools and new blade, follow these steps:

  1. Unplug the saw from the power source.
  2. Locate the two screws that hold the blade in place. These are usually located near the top of the blade.
  3. Use the Phillips head screwdriver to remove these screws.
  4. Carefully remove the old blade from the saw.
  5. Attach the new blade by aligning it with the holes in the saw where the screws go.
  6. Put the screws back in and tighten them until they’re snug.
  7. Plug the saw back in and test it out to make sure everything is working correctly. [4]

How do you change a blade on a pole saw

How do you thread a Fiskars Tree pruner?

To thread your Fiskars tree pruner, start by extending the pole to its full length. Next, find the hole in the cutting head and align it with the opening in the handles. Insert the cutting head into the handles until it clicks into place.

Now, take the rope and thread it through the holes in the handles, starting at the bottom hole and going up to the top hole. Finally, tie a knot at the end of the rope and you’re ready to go!

How do you sharpen Fiskars paper trimmer blades?

To sharpen your Fiskars paper trimmer blades, start by extending the blade to its full length. Next, use a sharpening stone or file to lightly sharpen the top and bottom edges of the blade. Be careful not to over-sharpen the blade, as this can damage it.

Once you’ve finished sharpening the blade, retract it back into the housing and test it out on a piece of paper. If it’s still not cutting as well as you’d like, you can repeat the process until you’re satisfied with the results.

Comparison of Numerical Data for Fiskars Pole Saw Parts

This table compares various indicators for different Fiskars Pole Saw parts. The data provided includes important specifications that are commonly used to compare different models of pole saw parts.

Pole Saw Part Weight (lbs) Blade Length (in) Cutting Capacity (in) Material Price
Fiskars 16-foot Chain Drive Extendable Pole Saw & Pruner 6.9 15 1.25 Fiberglass, Aluminum $139.99
Fiskars 14-foot Power-Lever Extendable Pole Saw & Pruner 5.95 15 1.125 Fiberglass, Aluminum $99.99
Fiskars 7.9-12 Foot Extendable Tree Pruning Stik Pruner 4.6 12 1.25 Fiberglass, Steel $89.99

This table compares different Fiskars Pole Saw parts based on their weight, blade length, cutting capacity, material, and price. The data presented can help buyers choose the right pole saw part for their needs based on these important specifications. The Fiskars 16-foot Chain Drive Extendable Pole Saw & Pruner is the heaviest pole saw part in the comparison at 6.9 lbs, while the Fiskars 7.9-12 Foot Extendable Tree Pruning Stik Pruner is the lightest at 4.6 lbs. The Fiskars 16-foot Chain Drive Extendable Pole Saw & Pruner has the longest blade length at 15 inches, while the Fiskars 7.9-12 Foot Extendable Tree Pruning Stik Pruner has the shortest blade length at 12 inches. The Fiskars 16-foot Chain Drive Extendable Pole Saw & Pruner also has the largest cutting capacity at 1.25 inches, while the Fiskars 14-foot Power-Lever Extendable Pole Saw & Pruner has the smallest cutting capacity at 1.125 inches. All three pole saw parts are made from a combination of fiberglass and metal materials, with the Fiskars 7.9-12 Foot Extendable Tree Pruning Stik Pruner using steel instead of aluminum. The prices of these pole saw parts range from $89.99 to $139.99.


Where are Fiskars tools made?

Fiskars tools are made in Finland and the United States. [5]

Are pole saws safer than chainsaws?

Pole saws are generally considered to be safer than chainsaws, as they allow you to keep a safe distance from the cutting blade. However, like any tool, they can be dangerous if used improperly. Always read the owner’s manual for your specific model of the saw before using it and follow all safety instructions.

How do you use Fiskars diamond-coated blade sharpener?

Using the Fiskars diamond-coated blade sharpener is easy. First, make sure that the area you will be working in is well-lit and that the work surface is clean. Next, identify the dull areas of your blade. To do this, run your finger along the blade. If it feels smooth in one direction and rough in the other, then that side is dull.

Now, hold the diamond-coated sharpener so that the diamond particles are facing the direction of the blade’s edge. Apply pressure to the sharpener and move it along the length of the blade in a single, even stroke. Repeat this process until all of the dull areas have been addressed.

When you’re finished, wipe the blade down with a clean, dry cloth to remove any residual diamond particles.

Is Titanium better than stainless steel for scissors?

Titanium is a stronger and more durable metal than stainless steel, so it holds an edge longer. Titanium scissors are also usually lighter than their stainless steel counterparts, making them easier to use for extended periods of time. However, they are generally more expensive than stainless steel scissors.

How do you put the blade on a Fiskars tree pruner?

Putting the blade on a Fiskars tree pruner is a relatively easy process. First, you will need to locate the screw that holds the blade in place. This should be located near the top of the pole, just above where you will be attaching the blade. Once located, unscrew it with a Phillips head screwdriver and remove it from the pole.

Next, you will need to attach the blade to the pole. The blade has two holes that should line up with two screws on the pole. Place them together and insert and tighten both screws with your Phillips head screwdriver. Make sure they are secure before attempting to use your pruner.

Finally, slide down the handle of your pruner until it fits snugly against the pole and re-tighten the original screw you removed at the beginning of this process. Your Fiskars tree pruner is now ready for use!

How do you sharpen a Fiskars pole saw blade?

Sharpening a Fiskars pole saw blade is relatively easy. First, you will need to remove the blade from the saw. This can be done by loosening the screws that hold it in place. Once the blade is removed, you will need to find a sharpening stone or file that is appropriate for the type of material your blade is made of. To sharpen the blade, run it along the stone or file in a circular motion until it has been sharpened to your desired level.

Once you have finished sharpening the blade, you will need to reattach it to the pole saw. Make sure all screws are tightened securely before using your pole saw again. Additionally, make sure that any debris or dust from sharpening is removed from both sides of the blade before reattaching it.

How do you tighten Fiskars pole saw blades?

Tightening the blades of a Fiskars pole saw is a relatively simple process. First, make sure to unplug the power cord from the wall or remove the battery if it is cordless. Then, locate the two screws that secure the blade in place. Use an adjustable wrench to loosen these screws and then carefully slide off the blade. Make sure to keep track of any washers or other components that come off with it. Once you have removed the blade, inspect it for any damage or wear and replace as necessary. Finally, reattach the blade using the same screws and washers and tighten them securely with your adjustable wrench.

Does Fiskars make hedge trimmers?

Fiskars is a well-known manufacturer of tools and garden products. While they do not make hedge trimmers, they do make other tools that can be used to maintain hedges and shrubs.

Fiskars makes a range of hedge clippers and shears designed for trimming hedges. Their clippers are designed with ergonomic handles that help reduce strain on the user’s hands, while their shears feature long handles for extra reach when cutting branches. Both the clippers and shears are made from durable steel blades that will stay sharp even after years of use.

In addition to hedge clippers and shears, Fiskars also makes other garden tools such as pruners, loppers, and grass shears. All of their products are designed to be easy to use and provide excellent results. Whether you need to trim your hedges or maintain your lawn, Fiskars has the right tool for the job.

Useful Video: How to use the Fiskars® Power-Lever® Extendable Pole Saw & Pruner (7’–14′)


Every gardener or landscaper knows that a good pole saw is an essential piece of equipment. But what happens when your trusty Fiskars pole Saw breaks down? It’s important to know about the different parts of your pole saw so that you can troubleshoot problems and get back to work as quickly as possible. In this blog post, we covered some of the most essential Fiskars pole saw parts, including the blade, handle, shaft, and head. We also provided a few tips on how to properly maintain your saw so that it has a long lifespan. Next time you need replacement Fiskars pole saw parts, be sure to check out our website for all the supplies you need. Thanks for reading!


  1. https://www.fiskars.com/en-gb/gardening/products/spare-parts-maintenance?showAll=true
  2. https://gardeningproductsreview.com/fiskars-chain-drive-extendable-pole-saw-pruner-review/
  3. https://www.youtube.com/watch?v=IdYx6fvIMyk
  4. https://homeguides.sfgate.com/install-pole-pruner-blade-103995.html
  5. https://www.fiskars.com/en-gb/about-us/how-our-classic-products-are-born